TP-Link TL-R460 - Manual (Page 56)

TL-R460 Cable/DSL Router User Guide
49
Disabled means the rule is ineffective.
To add/modify a static routing entry:
Step 1: Click Add New…/Modify shown in Figure 4-39, you will see a new screen
shown in Figure 4-40.
Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default
Gateway, and then select the status.
Figure 4-40
Step 3: Click Save to make the entry take effect.
) Note:
If you want to add more than one static route, please go to step 1 to continue.
Other configurations for the entries as shown in Figure 4-28:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next
button to view the information in the next screen.
4.8 IP & MAC Binding
Choose menu “IP & MAC Binding”, you can see the submenus under the main menu:
Binding Setting, ARP List.
Figure 4-41
Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.