TP-Link TL-R460 - Manual (Page 74)

TL-R460 Cable/DSL Router User Guide
67
Figure B-4
) Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
Method two: Use DMZ Host
Login to the router, click the menu Forwarding→DMZ. On the DMZ screen, select
“Enable”, and enter your IP address into the “DMZ Host IP Address” field (using
192.168.1.102 as an example), then to click the Save button.
Figure B-5
4. I want to build a WEB Server on the LAN, what should I do?
Because the WEB Server port 80 will interfere with the WEB management port 80 on the
router, you must change the WEB management port number to avoid interference. And
then add a WEB Server on your LAN. You can follow the steps below to proceed.
Step 1: To change the WEB management port number: Login to the router, click the
menu Security→Remote Management. On the Remote Management screen,
enter a port number except 80 (such as 88) into the "Web Management Port"
field. Click Save and the router will reboot.