TP-Link TL-R460 User Manual
Page 32
TL-R460
Cable/DSL Router User Guide
25
Figure 4-10
¾
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
¾
Auth Server & Auth Domain: Enter the Auth Name and Auth Domain provided by
your ISP.
¾
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is
rarely required, and should not be done unless you are sure it is necessary for your
ISP connection.
)
Note:
Please refer to 3 PPPoE for the explanations of Connect on Demand, Connect
Automatically, Connect Manually.
7. L2TP
If you are provided L2TP for ISP connection, your ISP will provides user name, password
and other information for you. Please select “L2TP” and then enter the following