TP-Link TL-R460 - Manual (Page 54)

TL-R460 Cable/DSL Router User Guide
47
Figure 4-38
¾ Packets Statistic Interval (5 ~ 60) - The default value is 10. Select a value
between 5 and 60 seconds in the pull-down list. The “Packets Statistic interval”
value indicates the time section of the packets statistic.
¾ DoS Protection - Enable or disable the DoS protection function. Only when it is
enabled, will the flood filters be effective.
¾ Enable ICMP-FLOOD Attack Filtering - Enable or disable the “ICMP-FLOOD
Attack Filtering”.
¾ ICMP-FLOOD Packets Threshold: (5 ~ 3600) - The default value is 50. Enter a
value between 5 and 3600 packets/s. When the current number of ICMP-FLOOD
packets is beyond the permitted value, the Router will start up the blocking function
immediately.
¾ Enable UDP-FLOOD Filtering - Enable or disable the “UDP-FLOOD Filtering”.
¾ UDP-FLOOD Packets Threshold: (5 ~ 3600) - The default value is 50. Enter a
value between 5 ~ 3600 packets/s. When the current number of UPD-FLOOD
Packets is beyond the permitted value, the router will start up the blocking function