Texas Memory Systems RamSan-300/320 - Manual (Page 28)

4.1.4 Enable/disable Web Interface
The system allows the administrator to disable Web access to
prevent users from accessing the system through the Web
interface.
Via Web Management
To disable the web interface via the web interface:
• Click on the “Management Control Processor” graphic
• Click on the “Network” tab
To disable the web interface, uncheck the “Allow Web” checkbox
and press the “Save” button.
Via Text Management
• From the Telnet Main Menu, select “Management setup”
• Select “Enable/Disable Web”; If Web access is currently
enabled, your option will be “Disable Web” and visa versa.
• Press the “ ” key or [ENTER] to toggle between the sections
• Select “Save changes and exit” to save the changes.
The menu displays the current Web Access status above the menu
options.
4.1.5 Enable/disable SNMP
The system allows the administrator to start and stop the SNMP
agent.
Via Web Management
To enable/disable SNMP via the web interface:
•
Click on the “Management Control Processor” graphic
• Click on the “Network” tab
To enable SNMP, check the “Allow SNMP” checkbox and press the
“Save” button.
To disable SNMP, uncheck the “Allow SNMP” checkbox and press
the “Save” button.
Via Text Management
• From the Telnet Main Menu, select “Management setup”
• Select “Enable/Disable SNMP”; If SNMP is currently enabled,
your option will be “Disable SNMP” and visa versa.
• Press the “ ” key or [ENTER] to toggle between the sections
• Select “Save changes and exit” to save the changes.
The menu displays the current SNMP Access status above the
menu options.
RamSan-300/320 User’s Manual - 24 -