Texas Memory Systems RamSan-300/320 - Manual (Page 39)

5.1.2 Identifying a RamSan
When you have more than one RamSan, the “Identify Device”
feature helps you to physically locate which RamSan you are
monitoring. This feature blinks the front panel display. The
following demonstrates how make the front panel display start and
stop blinking.
Via Web Interface
To make the RamSan front panel blink via web interface:
•
Click on the “Management Control Processor” graphic
• Click on the “General Info” tab
• Click the “Identify Device” button
The RamSan front panel will begin to blink. To make the front
panel stop blinking, click the “Identify Device” button again.
Figure 5-1: Identify Device button
RamSan-300/320 User’s Manual - 35 -