Setting scsi device identifiers – Texas Memory Systems RamSan-300/320 User Manual
Page 69
Advertising
Setting SCSI device identifiers
This allows a user to set an SCSI device identifier between 1 and
255.
• From the Telnet Main Menu, select “LUN Setup”
• Select “Modify LUN(s)”
• Select LUN (See instructions in Section 6.5 )
• Select “Set SCSI device identifier”
• Enter a unique device identifier from 1 to 255 and press
[ENTER].
• Select “Exit to the LUN configuration menu”
• To save the changes once you have completed all LUN
configuration, select “Save changes and exit”
Figure 6-13: Setting SCSI Device Identifier
RamSan-300/320 User’s Manual
- 65 -
Advertising