Texas Memory Systems RamSan-300/320 - Manual (Page 38)

LED Performance Monitoring
If your system is equipped with front panel LEDs, you can also
view bandwidth and IOPS:
From the front panel main
menu, select
“LED Display”
This mode uses the LEDs
to display bandwidth or
IOPS. To use the LEDs to
display bandwidth, select
“Display Bandwidth.” To
use the LEDs to display
IOPS, select “Display
IOPS.”
Once you select one of the
above options, the display
will ask you to “Enable
Autoblink.” If you enable
autoblink, the top LED will
blink (even with constant
bandwidth or IOPS).
LED Display
Display Bandwidth
RamSan-300/320 User’s Manual - 34 -