Via text management, Linking luns to/from fibre channel controllers, Via web interface – Texas Memory Systems RamSan-300/320 User Manual
Page 62: Section 6.4 ), Section 6.4 – linking luns to/from, Fibre channel controllers ), 4 linking luns to/from fibre channel controllers
6.3.2 Via Text Management
To view the LUN map via Text Management Interface:
• From the Telnet Main Menu, select “LUN Setup”
• Select “Print detailed LUN map”
Figure 6-7: LUN Map Screen
The LUN map, see Figure 6-7: LUN Map Screen, shows only three
configurations per page. To scroll through all of the entries, press
any key other than ‘Q.’
6.4 Linking LUNs to/from Fibre Channel Controllers
To make partitioned LUNs accessible to connected servers, the
administrator must link the LUNs to the RamSan’s Fibre Channel
controllers.
6.4.1 Via Web Interface
To change the links between LUNs and the Fibre Channel
controllers via the Web Management Interface:
• Click on the “Management Control Processor” graphic.
• Click on the “LUN Config” tab.
• Select the LUN to edit by clicking on the LUN graphic.
• Click the “Modify LUN” button.
• Select the links for the LUN by clicking the “Channel links”
checkboxes.
• Click the “OK” button.
RamSan-300/320 User’s Manual
- 58 -