Texas Memory Systems RamSan-300/320 - Manual (Page 37)

Fibre Channel Performance
The front panel display can show the Fibre Channel Controller
performance:
From the front panel main
menu, select
“Active Monitor Mode.”
This mode shows the
performance bars for each
Fibre Channel port. The
numbers represent the
Fibre Channel Controllers.
If a controller is not
installed, the number and
corresponding performance
will not display. The top
bars represent the port A
and the bottom bars
represent port B.
The system stays in Active
Monitor Mode for 10
minutes or until the user
selects “Deactivate
Monitor” from the front
panel main menu.
Active Monitor Mode
1==- 2=-- 3- 4===
RamSan-300/320 User’s Manual - 33 -