TOYOTA pmn - Manual (Page 34)

34
6. Underbody protection preparation
1. UNDERCOVER PREPARATION.
(a) Remove the 10 pop-rivets from the undercover.
(b) Remove from the bottom side (engine side) the plastic
reinforcement out of the sound insulation.
NOTICE: Before removing the plastic reinforcement
cut it with scissors.
(c) Fix the template to the undercover with tape.
K: Template (27-4)
(d) Mark the position where to cut.
(e) Cut the marked position.
(f) Remove the template.
(g) Turn the cover with the engine side facing up.
(h) Mark the position of the sound insulation where to cut.
(i) Cut the marked position.