TOYOTA pmn - Manual (Page 39)

39
9. Inlet pipe preparation
1. INSTALL VACUUM HOSE ADAPTER.
(a) Put Loctite 270 on the hose adapter.
(b) Install the hose adapter into the inlet pipe.
K: Vacuum hose adapter (2-5)
K: Inlet pipe (2-2)
Torque: 25 Nm
2. PREPARATION OF VSV.
(a) Mark the VSV bracket for drilling
(b) Drill a 6.5 mm hole into the VSV bracket.
R : VSV
3. INSTALL VSV.
(a) Install the VSV onto the inlet pipe with the bolt.
K: Bolt (2-10)
K: Washer (2-9)
K: Nut (2-11)
R : VSV
Torque: 9 Nm
K
K
Ø 6.5 mm
R
R
K
K
K
R