TOYOTA pmn - Manual (Page 61)

61
17. Install interior compartment
1. INSTALL CONTROL-UNIT ASSEMBLY. (MANUAL
TRANSMISSION ONLY)
(a) Install the control-unit assembly onto the studs using 3
nuts.
K: Nut (3 pcs.) (24-8)
Torque: 13 Nm
2. REMOVE AUTOMATIC TRANSMISSION
CONTROL-UNIT (AUTOMATIC TRANSMISSION
ONLY).
(a) Remove the 3 nuts.
(b) Remove the control-unit and put it aside. (do not
disconnect the connectors)
3. INSTALL CONTROL-UNIT ASSEMBLY
(AUTOMATIC TRANSMISSION ONLY).
(a) Install the control-unit assembly onto the studs using a
nut.
K: Nut (24-8)
Torque: 13 Nm
(b) Install the automatic control unit using the 3 nuts.
R : Nut (3 pcs.)
Torque: 13 Nm
K
K
K
K
R
R
R