TOYOTA pmn - Manual (Page 48)

48
(f) Install hose on engine side with a clamp.
R : Clamp
Torque: 3 Nm
8. INSTALL WATER OUTLET CONNECTIONS.
(a) Install the clamps on the water outlet hose.
K: Water outlet hose (17-2)
K: Hose clamp (2 pcs.) (17-3)
Torque: 3 Nm
(b) Install the water outlet hose between the Turbo
charger water tube and the engine water connection.
NOTICE: ENSURE THAT THE CLAMP MECHANISM
IS FACING DOWNWARDS TO AVOID
DAMAGE TO THE INLET TUBE (TO BE
INSTALLED LATER)
9. WATERHOSE FIXATION.
(a) Install the plastic clamp to fix the water outlet hose.
K: Plastic clamp. (16-4)
10. INSTALL PROTECTION CAP THROTTLE BODY
HOUSING.
(a) Install the blind cap on the throttle body housing with a
clamp.
K: Protection cap (12-2)
K: Clamp (12-1)
Torque: 9 Nm
R
K
K
K
K
K
K