Telit Wireless Solutions GE863 - Manual (Page 27)

GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
For example:
1- Let's assume you have to call the national number 040 - 4192111,
command:
ATD 0404192111<cr>
response
CONNECT 9600
2- Let's assume you have to call the national number but in international format +39-40-4192111,
command:
ATD +39404192111<cr>
response
CONNECT 9600
3- Let's assume you have to call the international number +386-40-4192111,
command:
ATD +386404192111<cr>
response
CONNECT 9600
2.7.3 Closing the Data call
2.7.3.1 Exit the data mode and enter the command mode
• Send escape sequence
+++
• wait the escape sequence pause time ( see S12 parameter)
• wait for response
OK
NOTE: After the Escape sequence and during the call the only command that is accepted by
the GE863-GPS is the ATH. All the other commands are not supported during a call.
TIP: during the escape sequence pause time S12 no further characters should be sent to the
device in order to enter the command mode.
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 27 of 109