Telit Wireless Solutions GE863 - Manual (Page 35)

GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
For example:
1- Let's assume you want to select the "SM" normal phonebook for operations,
command:
AT+CPBS="SM"<cr>
response
OK
- Now you might want to look for the entry at the position index = 7
command:
AT+CPBR=7<cr>
the response may look like:
+CPBR= 7,"+39404192369",145,"Fabio"
OK
- Now you might want to look for the entries at the positions from 7 to 9 and for example the position at
index 8 is empty
command:
AT+CPBR=7,9<cr>
the response may look like:
+CPBR= 7,"+39404192369",145,"Fabio"
+CPBR= 9,"0404192111",129,"Fabrizio"
OK
3.1.4 Phonebook entry Write
As first thing, you must select the desired storage as active (see par.3.1.1.1). Then:
•
send command
AT+CPBW=<index>,<number>,<type>,<name><cr>
where:
<index> is the index number of the desired PB record to be written (may be omitted if any
empty record number can be used).
<Number> is the phone number;
<type> is the type of number:
145 – international numbering scheme (contains the character "+")
129 – national numbering scheme
<Name> is the alphanumeric name associated with the number.
• wait for response:
Response Reason Action
OK Record has been successfully
written Proceed ahead
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 35 of 109