Telit Wireless Solutions GE863 - Manual (Page 4)

GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
1 Overview
The purpose of this document is the description of some common AT command procedures that may
be used with the
Telit GE863-GPS module .
In this document, all the basic functions of a mobile phone will be taken into account and for each one
of them, a proper command sequence will be suggested.
In the Advanced operation section the more useful services and features of the GSM network
supported by the
Telit GE863-GPS module is taken into account and some command sequence and
usage are provided for each one of them.
This document and its suggested command sequences shall not be considered mandatory; instead,
the information given shall be used as a guide for properly using the
Telit module . For further
commands and features that may not be explained in this document refer to the GE863-GPS Product
Description document where all the supported AT commands are reported.
NOTE
The information presented in this document is believed to be accurate and reliable. However, Telit
Communications S.p.A. assumes no responsibility for its use, nor any infringement of patents or other rights of
third parties, which may result from its use. No license is granted by implication or otherwise under any patent
rights of Telit Communications S.p.A. other than for circuitry embodied in Telit products. This document is
subject to change without notice.
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 4 of 109