Telit Wireless Solutions GE863 - Manual (Page 56)

GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
For example:
1- Let's assume your desired SMSC number is +39335123456 (stored in international format):
command:
AT+CSCA=+39335123456,145<cr>
response:
OK
3.5.1.4 Select New Messages indication behavior
When the device receives a new message a unsolicited indication is generated, this indication may be
sent to the DTE, buffered if the DTE is busy (for example during a data call) or discarded.
To set the desired behavior:
•
send command
AT+CNMI=<mode>,<mt>,<bm>,<ds>,<bfr><cr>
where:
Set command selects the behaviour of the device on how the receiving of new messages from the
network is indicated to the DTE.
Parameter:
<mode> - unsolicited result codes buffering option
0 - Buffer unsolicited result codes in the TA. If TA result code buffer is full, indications can be
buffered in some other place or the oldest indications may be discarded and replaced with the
new received indications.
1 - Discard indication and reject new received message unsolicited result codes when TA-TE link is
reserved, otherwise forward them directly to the TE.
2 - Buffer unsolicited result codes in the TA in case the DTE is busy and flush them to the TE after
reservation. Otherwise forward them directly to the TE.
3 - if <mt> is set to 1 an indication via 100 ms break is issued when a SMS is received while the
module is in GPRS online mode. It enables the hardware ring line for 1 s. too.
<mt> - result code indication reporting for SMS-DELIVER
0 - No SMS-DELIVER indications are routed to the TE.
1 - If SMS-DELIVER is stored into ME/TA, indication of the memory location is routed to the TE using
the following unsolicited result code:
+CMTI: <memr>,<index>
where:
<memr> - memory storage where the new message is stored
"SM"
"ME"
<index> - location on the memory where SM is stored.
2 - SMS-DELIVERs (except class 2 messages and messages in the message waiting indication
group) are routed directly to the TE using the following unsolicited result code:
(PDU Mode)
+CMT: <alpha>,<length><CR><LF><pdu>
where:
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 56 of 109