TechniSat DIGIT MF4-S - Manual (Page 17)

6.3 Audio/Video settings
To optimise your digital receiver for use with your television set, you
may make further settings in the menu Audio /Video settings.
> Press the Menu key to display the Main Menu.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.(Fig. 6-4)
> Now use the arrow keys up/down to mark the line
Audio/Video Settings.
> Confirm by pressing OK. The menu Audio/Video
Settings will be displayed. (Fig. 6-5)
> Use the arrow keys up/down to move the marker within
the menu, and to change the individual items as indicated.
When selecting a menu item, please note any messages
displayed on screen. The following settings may be made:
6.3.1 Picture format
> Use the arrow keys left/right to set the picture format
appropriate for your TV set: 4:3 or 16:9. This function provi-
des the automatic adjustment of the picture format for your
television set.
6.3.2 Language (Audio signal)
> Use the arrow keys left/right to select your preferred
language in this line. This function will automatically select
the preferred language, where available, following a scan.
6.3.3 Language (Sub-titles)
Your DVB receiver is equipped to display sub-titles. If the sub-title
function is activated, and the language selected is being broadcast,
these will be displayed automatically.
If the function is not activated, sub-titles can be switched on manual-
ly. The availability of sub-titles is indicated by display of the message
Sub-title selection. Please also note Point 7.13 of the operating
manual.
6.3.4 TV SCART mode
In this line, use the arrow keys left/right to set the parameter
according to your TV set, to FBAS, RGB or S-Video. For standard
sets, select FBAS.
17
(Fig. 6-4)
(Fig. 6-5)