TechniSat DIGIT MF4-S - Manual (Page 49)

Polarisation
> Use the arrow keys up/down to mark the line
Polarisation.
> In this line, use the OK key to enter the polarisation plane
(horizontal or vertical), whichever is appropriate for the
programme being scanned for.
Scan mode
> Use the arrow keys up/down to mark the line Scan
mode.
> Use the OK key to decide whether you wish to search only
for free-to-air programmes (Free) or whether you want to
include encrypted programmes in the scan (All).
> Confirm by pressing the red function key Start scan.
The scan will be started. Please note any messages display-
ed on screen.
> You may abort the scan at any stage by pressing the red
function key again.
8.4.4 Manual scan
If the automatic scan or the transponder scan is unable to locate a
particular programme, it may be necessary to additionally enter pro-
gramme-specific PID numbers for this programme. These numbers
may be found in the Internet, or may have to be obtained from the
relevant programme provider.
The menu (Fig. 8-18) differs from the menu Transponder scan
only in the menu items PCR PID, Audio PID and Video PID.
There is no need to enter the scan mode.
> Proceed as described for a transponder scan.
> In addition, use the arrow keys up/down to mark the
lines PCR PID, Audio PID and Video PID,and enter the
appropriate numbers using the numeric keys.
8.4.5 After the scan
While the scan is still in progress, you can follow the transponder
scan on your screen. When the scan is completed, the number of
transponders found, the number of programmes and of new pro-
grammes found will be displayed. In addition a prompt will be
displayed, (Fig. 8-19), asking whether you wish to accept the pro-
grammes found automatically into the TV or Radio list. If you decide
to accept the programmes automatically, you can also still decide
whether these should be added to the Favourites list in sorted or
unsorted order.
49
(Fig. 8-19)
(Fig. 8-18)