TechniSat DIGIT MF4-S - Manual (Page 42)

> Press the yellow function key Sort to enter the new posi-
tion of the programme into memory.
> To sort several programmes simultaneously, mark these as
described in 8.1.2 (Marking blocks of programmes).
> Now press the yellow function key Sort. A double arrow will
appear next to the block of programmes selected.
> Now use either the arrow keys up/down or the numeric
keys to place the programme block at the position in the pro-
gramme list where you would like to place it.
> Press the yellow function key Sort to enter the new posi-
tion of the programme block into memory.
> When you have completed configuring the programme list
according to your preferences in this manner, press the
Menu key to return to normal operation.
8.2 Programming the electronic programme guide
Your receiver is equipped with the facility of receiving a data channel
with additional SFI data via ASTRA satellite system (19°East). This
gives you a preview of SFI data of up to a week in advance.
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to mark the line
Programme guide.
> Confirm by pressing OK. The menu Programme guide
will be displayed. (Fig. 8-7)
> Use the arrow keys up/down to move the marker within
the menu, and to change the various positions as shown.
When selecting a menu item, please also note any messages
displayed on screen.
42
(Fig. 8-7)