5 vcr scart mode, 6 dolby digital (ac3), 4 antenna settings – TechniSat DIGIT MF4-S User Manual

Page 18

Advertising
background image

6.3.5 VCR SCART mode

In this line, use the arrow keys left/right to select the parameter

according to your TV set: FBAS or S-Video. For standard sets,

select FBAS.

6.3.6 Dolby Digital (AC3)

Various movies are broadcast in Dolby Digital format. This is indica-

ted by display of the Dolby logo

in the information window, once

the programme has been selected.

If you have a Digital 5.1 channel amplifier, you can, where available,

enjoy 5.1 channel Dolby Digital sound with specific movies. The only

requirement is that the digital output Audio Out Digital (see Point

4.5.2) of your DVB receiver must be connected with the digital input

of your Dolby Digital 5.1 channel amplifier.

If a programme is being broadcast in Dolby Digital sound, this will be

indicated by display of the Dolby logo when you swith to the program-

me. If the Dolby Digital function (AC3) is activated (on), these pro-

grammes will automatically be reproduced in Dolby Digital format.

If the function is not activated (off) , Dolby Digital sound can also be

switched on manually. Please also note Point 7.5.1 of the operating

manual.

6.4 Antenna settings

When you have completed adjusting your digital receiver to your indi-

vidual preferences, you may, if required, still have to set your digital

receiverin accordance with your antenna. In the menu Antenna

settings you will find the satellites selected by the installation assi-

stant. If the installation assistant was terminated prematurely, the

satellite positions ASTRA and EUTELSAT are pre-programmed.

If you wish to receive other satellites, or are using a different type of

LNC, adjust your digital receiveras follows for your requirements:

>

Press the Menu key to display the Main Menu. (Fig. 6-6)

>

Use the arrow keys up/down to mark the line Settings.

>

Confirm by pressing OK.

The menu Settings will be displayed. (Fig. 6-7)

>

Now use the arrow keys up/down to mark the line Antenna

Settings.

>

Confirm by pressing OK. The menu Antenna Settings

will be displayed. (Fig. 6-8)

The following settings can be made in this sub-menu:

18

(Fig. 6-6)

(Fig. 6-7)

Advertising