Tiger Products Co., Ltd JOHN DEERE 5101E - Manual (Page 109)

MAINTENANCE
Side and Rear Flail Maintenance Section 4-21
©2012 Alamo Group Inc.
MAINTENANCE
REVERSING MOWER ROTATION OF SD REAR FLAIL MOWERS
Remove the shield guard and belt shield. Next, remove the Rosta stop and loosen the Rosta Tensioner
(
CAUTION: the Rosta Tensioner is under belt pressure. Sudden release of this pressure may cause serious
injury). Remove the Rosta Tensioner and relocate to the Reverse Rotation Tensioner location. Using the
Rosta wrench, tention the belt, then tighten the Rosta bolt. Check the tension and adjust as needed. When
the correct tension is achieved install the Rosta stop and torque the bolts appropriately.
Reverse Rotation
Tensioner location
Rosta
Tensioner