Tiger Products Co., Ltd JOHN DEERE 5101E - Manual (Page 17)

Side & Rear flail Safety Section 1-11
SAFETY
WARNING!
In addition to the design and configuration of this Implement, including Safety Signs and Safety
Equipment, hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training of personnel involved in the operation, transport,
maintenance, and storage of the machine. Refer also to Safety Messages and operation
instruction in each of the appropriate sections of the Tractor and Equipment Manuals. Pay
close attention to the Safety Signs affixed to the Tractor and Equipment.
(SG-18)
Tiger mowers use balanced and matched system components for blade carriers, blades, cutter-
shafts, knives, knife hangers, rollers, drive-train components and bearings. These parts are made and
tested to Tiger specifications. Non-genuine “will fit” parts do not consistently meet these specifications.
The use of “will fit” parts may reduce mower performance, void mower warranties and present a safety
hazard. Use genuine Tiger mower parts for economy and safety.
SEE YOUR DEALER
Engine Exhaust, some of its constituents, and certain components contain or emit
chemicals known to the state of California to cause cancer and birth or other
reproductive harm.
WARNING!
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the state of California to cause cancer and birth or other
reproductive harm. Wash hands after handling!
WARNING! The rotating parts of this machine continue to rotate even after the PTO has been turned
off. The operator should remain in his seat for 60 seconds after the brake has been set,
the PTO disengaged, the tractor turned off, and all evidence of rotation has ceased.
(3PT-10)
“Wait a minute...Save a life!”
DANGER! The flail cutter shaft is designed for standard rotation (same
rotation as the tractor wheels during forward travel). Never operate the
cutter shaft in the reverse rotation. Operating this mower in reverse
rotation may cause objects to be thrown out the front of the mower
head.