Assembly, Axle brace mounting – Tiger Products Co., Ltd JOHN DEERE 5101E User Manual

Page 43

Advertising
background image

ASSEMBLY

Assembly Section 2-17

AXLE BRACE MOUNTING

Position the right axle brace under the tractor right hand side. Raise the brace up to

the matching mounting holes in the main fame and rear axle housing. Note the right side
brace is installed on outside edge of the main frame and the left side brace is installed on
the inside edge of the main frame. Pictures below show right side brace installation.
Install the clamp plate with capscrews, washers and nuts as shown in the main frame
parts section. Apply Loc-Tite to the threads and torque to the values noted in the torque
chart located in the maintenance section of this manual.

(ASM-JD-0072)

.

Advertising
This manual is related to the following products: