Thecus Technology i Series - Manual (Page 12)

2.3.2 Remote control – secure shell
SSH (secure shell) is required for i Series to remote login. The SSH client
software is available at the following web site:
SSHWinClient WWW:
http://www.ssh.com/
Putty WWW: http://www.chiark.greenend.org.uk/
Host name: 192.168.1.100
Login name: admin
Default password: admin
Tips
Thecus i Series only support SSH for remote control. For
using SSH, the IP address and the password is required for
login.
2.4 Enclosure
2.4.1 LCM
There are four buttons to control LCM (LCD Control Module), including:
c (up), d (down), ESC (Escape), and ENT (Enter).
After booting up the system, the following screen shows management port IP and
model name:
192.168.1.100
i Series ←
Press “ENT”, the LCM functions “Alarm Mute”, “Reset/Shutdown”, “Quick
Install”
, “View IP Setting”, “Change IP Config” and “Reset to Default” will
rotate by pressing c (up) and d (down).
When there is WARNING or ERROR level of event happening, the LCM shows
the event log to give users more detail from front panel too.
- 12 -