Thecus Technology i Series - Manual (Page 66)

• PD/S.M.A.R.T. events
Level Type Description
Info Disk inserted Info: Disk <slot> is inserted.
Info Disk removed Info: Disk <slot> is removed.
Warning S.M.A.R.T.
threshold exceed
condition Warning: Disk <slot> S.M.A.R.T. threshold
exceed condition occurred for attribute of
1.
read error rate
2. spin up time
3. reallocated sector count
4. seek error rate
5. spin up retries
6. calibration retries
Warning S.M.A.R.T.
information Warning: Disk <slot>: Failure to get S.M.A.R.T
information
• Physical HW events
Level Type Description
Warning ECC error Warning: Single-bit ECC error is detected.
Error ECC error Error: Multi-bit ECC error is detected.
Info ECC DIMM
Installed Info: ECC Memory is installed.
Info Non-ECC installed Info: Non-ECC Memory is installed.
Error Host chip failure Error: Host channel chip failed.
Error Drive chip failure Error: Drive channel chip failed.
Warning Ethernet port failure Warning: GUI Ethernet port failed.
• HDD IO events
Level Type Description
Warning Disk error Error: Disk <slot> read block error.
Warning
Disk error Error: Disk <slot> writes block error.
Warning HDD failure Error: Disk <slot> is failed.
Warning Channel error Error: Disk <slot> IO incomplete.
• SES events
Level Type Description
- 66 -