Thecus Technology i Series - Manual (Page 48)

Figure 3.6.7.10
1. Select “/ Volume config / User data volume”.
2. Click “
”.
3. Input a UDV name, choose a VG Name, select Dedicated cache which
is created at Step 1, and input the size for the UDV; decide the stripe
height, block size, read/write mode and set priority, finally click
“
“.
4. Done. A UDV using dedicated cache has been created.
Figure 3.6.7.11
(Figure 3.6.7.11: UDV named “UDV-1” uses global cache volume 80MB, and “UDV-2” uses
dedicated cache volume 80MB. “UDV-2” is initialing about 5%.)
Figure 3.6.7.12
(Figure 3.6.7.12: In “/ Volume config / Cache volume”, UDV named “UDV-2” uses dedicated
cache volume 80MB.)
- 48 -