Thecus Technology i Series - Manual (Page 23)

Figure 3.4.7.1
3.4.8 SNMP
Select “SNMP” to set up SNMP trap for alert via SNMP. It allows up to 3 SNMP
trap addresses. Default community setting is “public”. User can choose the event
log levels and the default value of SNMP is INFO event log enabled only.
Figure 3.4.8.1
There are many SNMP tools. The following web sites are for reference:
SNMPc:
http://www.snmpc.com/
Net-SNMP: http://net-snmp.sourceforge.net/
- 23 -