Thecus Technology i Series - Manual (Page 37)

No. Number of this user data volume. The button in below
to the UDV No. is “More Information” indication. It
shows the details of the User data volume.
Name Name of this user data volume. The button in below to
the UDV Name is “Rename” function.
Size(GB)
Total capacity of this user data volume. The button in
below to the size is “Extend” function.
Status
The status of this user data volume.
“Online”
Æ user data volume is online.
“Fail”
Æ user data volume is failed.
Status 1 “WT” Æ Write Through.
“WB” Æ Write Back.
“RO” Æ Read Only.
The button in below to the status1 is “Set read/write
mode”
function.
Status 2 “HI” Æ HIgh priority.
“MD” Æ MiD priority.
“LO” Æ LOw priority.
The button in below to the status2 is “Set Priority”
function.
Status 3
“I” Æ user data volume is doing initializing.
“R” Æ user data volume is doing rebuilding.
“M”
Æ user data volume is doing migration.
R %
Ratio of initializing or rebuilding.
RAID The RAID levels that user data volume is using.
#LUN Number of LUN(s) that data volume is attaching.
VG name
The VG name of the user data volume.
CV (MB)
The cache volume of the user data volume.
- 37 -