Thecus Technology i Series - Manual (Page 42)

Figure 3.6.7.2
(Figure 3.6.7.2: Creating a RAID 0 with 2 physical disks, named “VG-R0”. The total size is
148GB. Because of no related UDV there, free size still remains 148GB.)
Step 2:
Create UDV (User Data Volume).
To create a data user volume, please follow the procedures.
Figure 3.6.7.3
1. Select “/ Volume config / User data volume”.
2. Click “
”.
3. Input a UDV name, choose a VG Name and input a size to the UDV;
decide the stripe high, block size, read/write mode and set priority,
finally click “
“.
4. Done. A UDV has been created.
5. Do one more time to create another UDV.
- 42 -