TechniSat DigiCorder S1 - Manual (Page 13)

4.5.2 Digital
Should your amplifier be equipped with an appropriate electri-
cal or optical input, you may connect the sockets AUDIO
OUT DIGITAL elektrical resp.. AUDIO OUT DIGITAL optical
with the electrical resp. the optical input of your amplifier.
Depending on the channel selected, sampling rates of 32,
44,1 and 48 kHz are available.
Where broadcast, the Dolby Digital-Signal (AC3) is also avai-
lable at this output.
4.6 Unit with S-Video input (Hosiden)
h To connect the S-Video output with a unit equipped
with an S-Video input (e.g. beamer etc.).
4.7 Serial Interface (RS 232)
The RS 232 interface serves to carry out pre-programming
via a PC, and to update the operating software.
5 Initial installation
Once you have read the safety notes, and have connected
the unit as described in Chapter 4, you may switch on the
unit as described in Chapter 7. When the unit is switched on
for the first time, the start window of the installation assistant
is displayed: AutoInstall. (Fig. 5-1) The installation assistant
will help you to make the most important settings on your
digital receivers quickly and simply.
You can exit from the initial installation procedure at any time
by pressing the red function key. Press the green function
key to return to the previous step of the installation. You can
thus correct any mistakes made at any time.
If the initial installation is not carried out, or is aborted before
completion, the unit will commence operation with a standard
pre-programmed configuration.
The initial installation described here serves only as an
example. The exact procedure of the intial installation will
depend on the settings you choose to make.
Please follow closely the instructions given on the screen.
Operating language:
>
Press OK to move to the selection window for the
operating (menu) language (Fig. 5-2)
> Use the up/down arrow keys to select the desired
operating language.
> Confirm by pressing OK.
Audio language
>
Use the up/down arrow keys to select the preferred
13
(Fig. 5-1)
(Fig. 5-2)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 13