TechniSat DigiCorder S1 - Manual (Page 51)

8.4 Programme scan
As mentioned, your digital receiver has been pre-programm-
ed for reception of the ASTRA and EUTELSAT satellites. To
receive new programmes, or those of other satellites, various
options are provided to preform a programme scan (search).
1. Automatic scan
Select this type of search mode to scan all satellites selected
in the menu LNC Settings (Point 6.4 and 8.4) for program-
mes.
2. Satellite scan
Select this search mode to scan a selected satellite for pro-
grammes.
3. Transponder scan
Select this search mode to scan a specific transponder of a
satellite for programmes.
4. Manual scan
Select this search mode to scan specifically for a particular
programme, using the programme-specific PID numbers.
When the scan has been completed, a message will appear
on screen indicating how many programmes your digital
receiver has found, how many of these are new, and how
many are encrypted. New programmes will be stored in the
Total list, from where they can be included in the Favourites
list, as per Point 8.1.
>
To perform a programme scan, first call up the Main
Menu. (Fig. 8-13)
> Use the up/down arrow keys to mark the line Scan.
> Confirm by pressing OK.
The sub-menu Scan will be displayed. (Fig. 8-14)
> Use the up/down arrow keys to select a search
mode, and confirm by pressing OK.
8.4.1 Automatic scan
When this search mode is used, all the available satellites
included in the menu LNC settings (Points 6.4 and 9.4) will
be automatically scanned for programmes. You can select
whether you wish to scan for all programmes (encrypted and
free-to-air), or only free-to-air programmes. (Fig. 8-15)
>
Using the OK key, decide whether you wish to scan
only for free-to-air programmes (Free programmes)
or whether you want to include encrypted programmes
(All programmes).
> Confirm by pressing the red function key Start scan.
The scan may take more than 15 minutes. Please
note any on-screen messages displayed.
51
(Fig. 8-13)
(Fig. 8-14)
(Fig. 8-15)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 51