TechniSat DigiCorder S1 - Manual (Page 31)

7.14.4 Now (table with current programme
contents)
Initially, the SFI table “Now” (Fig. 7-16) will be displayed, sho-
wing programmes currently being broadcast. The yellow bar
to the right of the programme name indicates the elapsed
broadcast time of the current programme. The programme
currently selected is highlighted.
>
Use the up/down arrow keys to move the marker
one line at a time. Use the left/right arrow keys to
move the marker one page at a time (paging).
> You can now utilise the SFI functions (Point 7.14.3).
> Press the yellow function key to move to the SFI
table “Next” (See Point 7.14.5)
or
>
press the TV/Radio key to revert to normal operation.
7.14.5 Next
> Use the yellow function key to display the table
"Next" (following programmes) (Fig. 7-17).
> All the SFI functions are available (Point 7.14.3).
> Press the yellow function key to move to the SFI
table “More” (Point 7.14.6)
or
>
Press either the green function key or the Back key
to revert to the previous SFI table “Now”
or
>
Press the TV/Radio key to revert to normal operation.
7.14.6 More
> By pressing the yellow function key again while the
SFI table “Next” is displayed you can move to the SFI
table “More”. (Fig. 7-18)
This table displays an additional time window in the
title line. This time window shows the current time of
the SFI table displayed.
> Press the yellow function key to page further
through the programme in the time steps indicated in
the yellow colour bar.
> Keep the yellow function key pressed down to conti-
nue paging. A clock will be displayed to facilitate the
search.
Press the green function key to page backwards
through the tables.
The individual days of the week are shown along the
bottom of the screen. If information relating to the fol-
lowing days is available, the appropriate fields will be
highlighted.
> To display a preview for a particular day, press the
appropriate numeric key.
31
(Fig. 7-17)
(Fig. 7-18)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 31