TechniSat DigiCorder S1 - Manual (Page 58)

> To delete the limits, press the green function key
Delete lim.
> Confirm the screen prompt by pressing OK (Fig. 9-6)
9.1.2 Set Eastern limit
> To enter the Eastern limit, first use the arrow keys to
mark the field Save.
> Now press the arrow key right to turn the antenna to
the maximum Eastern position possible or desirable
> Press the yellow function key Actions to display the
window listing the available actions.
> Now use the up/down arrow keys to mark the line
Set Eastern limit.
> Confirm by pressing OK.
> To set the Eastern limit, press the green key (Eastern
limit), then confirm the following prompt by pressing
OK (Fig. 9-7).
9.1.3 Setting Western limit
> To enter the Western limit, first use the arrow keys to
mark the field Save.
> Now press the arrow key left to turn the antenna to
the maximum Western position possible or desirable
> Press the yellow function key Actions to display the
window listing the available actions.
> Now use the up/down arrow keys to mark the line
Set Western limit.
> Confirm by pressing OK.
> To set the Western limit, press the green key
(Western limit), then confirm the following prompt by
pressing OK (Fig. 9-8).
9.2 Geo positioning
If you know the geographical co-ordinates of your location,
and are equipped with a suitable motor, this function will
facilitate the procedure of finding the various satellite
positions. The co-ordinates of some German cities can be
found in the Annexure (Point 13).
Note! You should only activate the geo-positioning function if
your DiSEqC motor supports this function.
>
As described above, call up the menu for setting the
motorised antenna.
> Use the arrow keys to mark the field Geo.Pos.
> Confirm by pressing OK. A menu will b e displayed,
allowing you to enter your location. (Fig. 9-9)
> Use the OK key to select On or Off for the geo-posit-
ioning function.
> Use the arrow keys to select the field for entering the
geographical longitude.
> Use the numeric keys to enter the geographical
58
(Fig. 9-8)
(Fig. 9-9)
(Fig. 9-6)
(Fig. 9-7)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 58