TMC ET4000 - Manual (Page 38)

Operating Your System
28
To make a call on another line:
1 Press HOLD to place the first call on
hold.
2 Press another LINE button to make
a call on that line.
3 Press the LINE button of the first
call at any time to return to the first
call.
To answer a call ringing on
another line:
1 Press HOLD to place the first call on
hold.
2 Press the flashing LINE button to
answer the incoming call.
To switch between lines:
1 Press HOLD to place your current
call on hold.
2 Press another LINE button to make
or answer another call.
Using Another Line During a Conversation
While having a conversation on one line, you
may make a call on another line. Press HOLD to
place your first call on hold and then press
another LINE button to make a second call.
Press the first LINE button at any time to return
to your original call and disconnect the second
call. If you wish to keep the second call, you
must remember to place it on hold before return-
ing to the original call.
While having a conversation on one line, if a call
comes in on another line, its line lamp will begin
flashing and a double ring will sound every 15
seconds to alert you of that incoming call. If an
incoming call is ringing on a line that is set to
“ringer off” at your telephone, the alerting ring will
not sound.
You may answer the call by pressing the flashing
LINE button. Remember to put the first call on
hold before answering the incoming call, or the
first call will be disconnected.
You can switch between lines as much as you
want during the course of a call. Always remem-
ber to place your current call on hold before seiz-
ing another line, or you will disconnect your cur-
rent call.
REDIAL
HOLD
Remember to put your current call
on hold before seizing another line
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:52 PM Page 38