TMC ET4000 - Manual (Page 62)

52
Intercom Operation
To page another station:
1 Press PAGE.
2 Dial the two-digit station number of
the station you wish to page.
3 After you hear the paging tone,
speak towards the telephone or lift
the handset and make your
announcement.
To make an All Page:
1 Press the PAGE button twice.
2 After you hear the paging tone,
speak towards the telephone or lift
the handset and make your
announcement.
3 Replace the handset in the cradle or
press the SPEAKER button to hang
up.
Making Pages
The Paging feature allows you to make
announcements to other EPIC stations in the
system. When you make a Page, your speaker-
phone is automatically activated; you can talk
immediately using the speakerphone, or lift the
handset and talk.
Note: You may Page another station only if it is
not in use, does not have DO NOT DISTURB
activated, and is not set to Block Pages. If the
station is in any of these conditions, you will hear
a no action tone.
The All Page feature enables you to make
announcements through all of the other EPIC
stations.
When you make an All Page, your announce-
ment, preceded by a double paging alert tone,
will be heard at all the phones that are not in use
and do not have their DO NOT DISTURB or
Page Block activated.
Press PAGE followed
by a station button to
make a page to that
station
Press PAGE twice
to make an
All Page
TRANSFER
PAGE
REDIAL
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:52 PM Page 62