TMC ET4000 - Manual (Page 40)

Operating Your System
To transfer a call after first
announcing it to the other sta-
tion:
1 Place an intercom call to the desired
station. The outside call is automat-
ically placed on hold.
2 Wait for an answer. Announce that
you are transferring the call.
3 Press the TRANSFER button.
To transfer a call directly,
without first announcing it to
the other station:
1 Press the TRANSFER button.
2 Dial the desired two-digit station
number to transfer the call to that
station.
30
You may transfer a call to another station after
first placing an intercom call to the desired sta-
tion to announce the call. If the person at the
other station wishes to talk to the caller, simply
press the TRANSFER button and hang up your
telephone. This feature is especially useful for
screening calls.
Note: If the other EPIC station does not wish to
be transferred the call, press the LINE button to
return to the outside call.
You may also transfer a call directly, without
announcing it to the other station. While the
desired station is ringing, the call will stay on
hold at all the other stations, including yours. If
the person at the desired station does not
answer, you can re-engage the call by pressing
the flashing LINE button. Likewise, if you hear
your telephone ringing the transfer ring and you
are nearer to another telephone, you can take
the call at this telephone simply by pressing the
flashing LINE button.
Note: If the desired station does not answer, it
will stop ringing after one minute.
Transferring an Outside Call to Another Station
TRANSFER
PAGE
Press TRANSFER
to send a call to
another station
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:52 PM Page 40