Additional information, Using optional external feature module (continued) – TMC ET4000 User Manual

Page 77

Advertising
background image

Additional Information

You may connect up to four Door Intercom
Adapters to your EPIC system. Connect each
one to a separate door intercom speaker and
assign each a different station number from 23 to
26 (Follow the instructions supplied with the
adapter).

When someone rings a door speaker, its corre-
sponding station indicator will flash at all the
phones. You may answer the door, via the inter-
com, from any station by placing an intercom call
to that station.

You may set the door intercom bell volume at
each phone separately. The lowest volume set-
ting at each telephone is “OFF”, so you can eas-
ily turn off the doorbell at particular telephones.

If you choose to connect a magnetic door strike
to the system, you may unlock this door from any
station by pressing the memory button which has
been made into a “key” for this door.

To make a memory button into a “key”, press
PROGRAM, then MEM, then the memory button
where you wish to store the door “key”. Press
CHANGE, then press FLASH, then HOLD, fol-
lowed by the number of the desired door box
(from “23” to “26”), then press SAVE.

Note: You may press the memory button to
unlock the door at any time. There is no need
to be connected to the door speaker over the
intercom.

External Feature Module set as a
Door Intercom/Door Opener Adapter

1

Install External Feature Module.

2

Follow the instructions to set it as a

Door Intercom Adapter.

3

Connect a door intercom speaker to

the Adapter.

4

If you wish, you may connect a mag-

netic door strike to the Adapter.

To answer a door speaker over the
intercom:

1

Place an intercom call to the number

that is flashing in your display.

To adjust the door intercom bell
volume at your telephone:

While the phone is on-hook and idle:

1

Press HOLD.

2

Press PAGE.

3

Press the up and down VOLUME

buttons to set desired door intercom
bell volume.

To unlock a magnetic door lock:

1

Press the memory button that has

been made into a “key” for this door.

Using Optional External Feature Module (Continued)

67

ET4000 UG for PDF v8 062502.qxd 6/25/02 12:52 PM Page 77

Advertising