TMC ET4000 - Manual (Page 64)

54
To choose how your phone
will respond to intercom calls:
1 Press PROGRAM.
- The display will read “Program...”
2 Press the soft key under NEXT
repeatedly, until “Intercom Prefs”
appears in the display, and then
press ENTER.
The display will show the current
intercom setting.
3 Press the soft key under CHANGE
repeatedly, until the desired inter-
com setting is displayed.
The choices are:
Intcm:HANDSFREE (factory setting)
Intcm:RING
Intcm:VOICE
4 Press PROGRAM to exit.
Selecting Intercom Ring, Intercom Voice, or Handsfree
Intercom Operation
You may set your telephone to respond to inter-
com calls in one of three ways:
INTERCOM HANDSFREE: When someone
makes an intercom call to you, your telephone
will ring once, then give you a triple alert tone
which lets you know that your phone has auto-
matically answered the intercom call on speak-
erphone. You may respond to the call simply by
speaking towards your telephone.
INTERCOM RING: When someone makes an
intercom call to you, your telephone will ring
repeatedly with the intercom ring. You may
respond to the call by lifting the handset or
pressing the SPEAKER button.
INTERCOM VOICE: When someone makes an
intercom call to you, your telephone will ring
once, then give you an alert tone, followed by the
caller’s voice. You may respond to the call by
lifting the handset or pressing the SPEAKER
button.
Note: When someone makes an intercom call to
you while you are on an outside line, you will
hear a single intercom ring regardless of your
intercom ringer setting. (See Using Off Hook
Voice Announce, page 55.)
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:52 PM Page 64