TMC ET4000 - Manual (Page 42)

Operating Your System
Using Caller ID
To see the caller ID informa-
tion of an incoming call:
The caller ID information will be dis-
played automatically, with no need to
press the CALLER ID button.
To use call waiting caller ID:
When you are on the line and another
call comes in, the display will automati-
cally display the caller ID information.
If you wish to answer that call, use the
FLASH button to toggle between the
calls.
To use the NEW CALL Lamp:
When the NEW CALL lamp is lit solid,
this means that at least one new call
has been added to the caller list since
the Caller ID button was last pressed.
Note that the NEW CALL lamp will
turn off as soon as you press the
Caller ID button, regardless of
whether you view the new calls or
not. Note also that if you answer a call
at your phone, it will not light the NEW
CALL lamp.
To view numbers in the caller
list:
1 Press the CALLER ID button.
2 Use the right and left arrow buttons
under the display to view the caller
list.
The Caller ID feature works in conjunction with
Caller ID service, which may be offered by your
local telephone company, is name and number
and call waiting caller ID compatible, and can
store up to 50 of your most recent calls.
In order for this feature to work, you must sub-
scribe to the Caller ID service from your local
telephone company. Name and number caller
ID and call waiting caller ID may not be available
in all areas that offer caller ID service, and may
cost more than basic number caller ID service.
Note that you must order Caller ID service sepa-
rately for each line on which you want the serv-
ice.
If you subscribe to Call Waiting Caller ID com-
bined service, your telephone will let you see
who is calling while you are on another call.
Note that your telephone company must provide
this service in order for this feature to work.
When you press the CALLER ID button to view
the caller list, the display will indicate the number
of new calls in the caller list, as well as the total
number of calls in the caller list. A “new” call is
one that has not yet been viewed. You can then
use the right arrow button to view the list from
most recent to oldest, or the left arrow button to
go from the oldest to the most recent calls.
Press CALLER ID and the arrow buttons
to view the caller list
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:52 PM Page 42