Toshiba T300MVi - Manual (Page 16)

3
2. Feature Summary
Ethernet Port
IEEE 802.3 10/100BaseT Ethernet compliant. Shielded RJ45 connector
accepts standard CAT5-type 8-conductor unshielded twisted-pair (UTP) patch
cables. Supports multiple simultaneous protocols.
RS485 Port
One optically-isolated half-duplex 2-wire RS485 port (A / B / Signal Ground /
Shield). This port allows a selection of various master and slave protocols.
RS232 Port
One RS232 port that can be used to configure the unit, update the internal
firmware, upload/download configuration files or act as a control protocol port.
Text-Based Console Configuration
Basic unit configuration is performed via a text-based console interface,
available locally over the RS232 port via a standard PC terminal program such
as Microsoft Windows HyperTerminal®, or remotely over Ethernet via a Telnet
session. The unit also provides initial configuration access via ICMP (“ping”)
configuration.
Macromedia® Flash-Enabled Embedded Web Server
Advanced unit configuration and point monitoring/control are also provided via
an embedded web server using the HTTP protocol. The unit’s web server
feature provides direct data access and control via standard web browsers such
as Microsoft Internet Explorer and Netscape Navigator. The latest version of
Macromedia Flash Player browser plug-in is required.
Configuration File Upload/Download
The interface’s configuration can be uploaded from / downloaded to a PC,
which provides the capability for PC-based file backup and easy configuration
copying to multiple units.
Network Timeout Action
A per-port and per-point two-level configurable network timeout action can be
programmed that allows each internal point to have its own unique “fail-safe”
condition in the event of a network interruption.
Indicators
•
1 green “LNK” LED that is on whenever a valid Ethernet connection is
detected.
• 1 green “SPD” LED that is on whenever a 100BaseT Ethernet connection
is established.