3 communication status indicators, 4 unit status, 5 set date and time – Toshiba T300MVi User Manual
Page 43
30
•
Uploading a configuration file via Xmodem to the interface (refer to section
13.3) will also cause the unit to become “configured”.
Figure 17: “Configuration Required” Notification
14.3 Communication Status Indicators
Figure 18 shows the communication status indicators. These will blink
periodically to show the status of data communication between the web browser
and the unit.
Figure 18: Communication Status Indicators
14.4 Unit Status
Figure 19 shows the non-modifiable unit status information. This includes the
48-bit Ethernet MAC address, and the application firmware version information.
Figure 19: Unit Status
14.5 Set Date and Time
Figure 20 shows the submission boxes in which new date and time information
can be entered. Note that the hours are entered in military time format (0-23 =
12AM – 11PM).