Toshiba T300MVi - Manual (Page 61)

48
•
Point parameter number entry radix is decimal (e.g. 10 = 10
10
).
•
Note that although every one of the parameters listed in Table 4 is always
accessible via the network, writing to parameters 1 - 10 may not have an
actual effect on the drive’s operation (depending on the values of
SCAN_R_SIZE and SCAN_RCV01_AS ... SCAN_RCV10_AS), and reading
from parameters 11 – 35 may not return actual drive status data
(depending on the values of SCAN_W_SIZE and SCAN_WR01_AS ...
SCAN_WR25_AS). Refer to section 4 for more information.