Toshiba T300MVi - Manual (Page 8)

vii
System Integration Precautions
The following precautions are provided as general guidelines for the setup of
the ASD within the system.
• The Toshiba ASD is a general-purpose product. It is a system component
only and the system design should take this into consideration. Please
contact Toshiba for application-specific information and for training
support.
• The Toshiba ASD is part of a larger system and the safe operation of the
device will depend on observing certain precautions and performing proper
system integration.
• A detailed system analysis and job safety analysis should be performed by
the systems designer and/or systems integrator before the installation of
the ASD component. Contact Toshiba for options availability and for
application-specific system integration information if required.
Personnel Protection
• Installation, operation, and maintenance shall be performed by Qualified
Personnel Only.
• A thorough understanding of the ASD will be required before the
installation, operation, or maintenance of the ASD.
WARNING
• Rotating machinery and live conductors can be hazardous and shall not
come into contact with humans. Personnel should be protected from all
rotating machinery and electrical hazards at all times.
• Insulators, machine guards, and electrical safeguards may fail or be
defeated by the purposeful or inadvertent actions of workers. Insulators,
machine guards, and electrical safeguards are to be inspected (and tested
where possible) at installation and periodically after installation for potential
hazardous conditions.
• Do not allow personnel near rotating machinery. Warning signs to this
effect shall be posted at or near the machinery.
• Do not allow personnel near electrical conductors. Human contact with
electrical conductors can be fatal. Warning signs to this effect shall be
posted at or near the hazard.
• Personal protection equipment shall be provided and used to protect
employees from any hazards inherent to system operation.