Toshiba T300MVi - Manual (Page 48)

35
14.9 Point Configuration
The TOSVERT-300MVi Multiprotocol Ethernet and Modbus RTU Interface
supports 100 total points. The configuration of these points determines what
data is available from attached network devices. Points are configured using
the interface shown in Figure 24.
Figure 24: Point Configuration Interface
The list on the left displays the point number, name and current value for each
available point. Clicking on one of these locations will load that point’s current
configuration into the interface on the right, where the configuration may be
edited.
Each point contains the following configuration attributes:
• Name: This is a user description of the point, up to 16 characters.