Texas Instruments 3000 WinSX - Manual (Page 106)

Using a Password
Removing a Password
Remove the current password as follows.
1. Highlight the Remove Password command on the Password Utility
menu and press the Enter key. The following menu displays:
2. Type the current password and press the Enter key. If you type the
correct password, the message
Password check OK
displays on the next line. Press the Enter key to remove the current
password, or press the Esc key to abort the process and return to the
Password Utility menu.
If you type the wrong password, the message
Incorrect Password
displays on the next line, and you are prompted to press any key to
return to the Password Utility menu. You can try to remove the
password again, or you can exit the Password Utility menu by selecting
Exit.
Installing and Using Application Programs 5-13