Texas Instruments 3000 WinSX - Manual (Page 189)

Screen Standards
External Monitor Support
The TravelMate 3000 WinSX supports all IBM standard VGA video in addition to 800 by
600, 1024 by 768, and 132column Paradise
TM extended modes.
Paradise Modes Supported
Mode No.
(hex)
Resolution Font Clock Memory
Size
132-column Text Modes (Supported on CRT only)*
54
32 x 43 x 16 8 x 8 44.7 MHz 256 KB
55 132 x 25 x 16 9x 16 44.7 MHz 256 KB
56 132 x 43 (mono) 8 x 8 44.7 MHz 256 KB
57 132 x 25 (mono) 9 x 16 44.7 MHz 256 KB
640 x 400 Modes
5E
640 x 400 x 256 9x 16 25 Mhz 256 KB
640 x 480 Modes
5F
640 x 480 x 256 9x 16 25 MHz 512 KB
800 x 600 Super VGA Modes (Supported on CRT only)
58/6A
800 x 600 x 16 8 x 8 44.7 MHz 256 KB
59/613 800 x 600 (mono) 8 x 8 44.7 MHz 256 KB
1024 x 768 Modes (Supported on CRT only)
5A
1024 x 768 x 2 9 x 16 44.7 MHz 256 KB
5B 1024 x 768 x 4 9x 16 44.7 MHz 256 KB
5D 1024 x 768 x 16 9 x 16 44.7 MHz 512 KB
*The 132-column text mode requires special software drivers; you should specify
PARADISE as the type of VGA controller. Some drivers are provided by TI, and some
are provided by application programs.
dag Super vGA modes are not supported on IBM PS/2 8503, 8512, 8513, or 8514
monitors or the equivalent fixed-frequency displays (the 8503 is a monochrome display).
The vertical and horizontal size and position controls on monitors can be adjusted to
display the entire 800-by-600 graphics mode Image without distortion.
H-4 Screen Standards