Texas Instruments 3000 WinSX - Manual (Page 64)

TravelPoint Pointing Device
3. If you plan to use the TravelPoint holder, remove the Numeric Keypad
connector cover, attach the holder to the right side of the computer as
shown in the figure, and tighten the attachment screw.
4. Reconnect the AC Adapter and turn on the computer. Your computer
warms up and displays the Microsoft Windows menus.
You now can use TravelPoint with Windows with no further action, but other application
programs may require adding the TIMOUSE device driver to your CONFIG.SYS file as
described later in this chapter.
Getting Started 3-23