Texas Instruments 3000 WinSX - Manual (Page 115)

RAM Modules
3. Insert the screwdriver blade between the F1 key and the I key and gently
press down on the keyboard until the leftmost catch snaps locked.
4. Insert the screwdriver blade between the F8 key and the 7 key and
gently press down on the keyboard until the center catch snaps locked.
5. Insert the small screwdriver blade between the Ins key and the
Backspace key and gently press down on the keyboard until the
rightmost catch snaps locked.
6. Test the installation by closing the computer display/cover. If the
display closes securely with no resistance, the keyboard is correctly
installed.
Changing Memory Setup
After installing the RAM modules, turn on the computer, load the Setup Program, and
reset the Extended item to match the computer's new RAm capacity. See Chapter 4 for
information on the Setup Program. See Appendix F for details on Extended and
Expanded memory.
TravelMate 3000 WinSX Options 6-7